PRODUCT APPRAISAL/APPLICATION
Serological water/Liquid bath is widely used for bacteriological and varied laboratory applications requiring general tests and procedures in variety of research and testing laboratories. Apart from that Serological Water Bath is conceptualized & designed to handle Clinical procedures, Incubation as well as most Serological, Pharmaceutical, Biomedical procedures and various other general and specialized applications in laboratories.
BASIC CONSTRUCTION
Serological Water/Liquid Bath is a sturdy, robust double walled heating unit. Complete Inner/Working Chamber is made of High Grade satin finish thick STAINLESS STEEL sheet. Outer Chamber is fabricated out of thick Mild Steel Sheet duly pre treated with primers for rust proofing & attractively finished with durable powder coated paint. The Gap in between the walls is filled with high grade Super Glass Wool Insulation to prevent any thermal losses. Water Bath is provided with a pyramidal shaped top cover and perforated removable diffuser tray to cover immersion heaters but supplied without rack or thermometer.
PYRAMIDAL LID
Unit is Incorporated with a pyramidal lid shaped top cover so as to prevent falling of the condensed water droplets on to the specimen.
DRAIN
Water Bath is provided with a Drain Plug to facilitate easy empting and cleaning of the Inner Chamber whenever required.
TEMPERATURE (Heating Elements)
To impart uniform heating throughout the chamber, High Grade Immersion Heating Element is fitted at the bottom of the Serological Water Bath with different rating for different sizes and is covered with perforated removable diffuser tray made of Stainless Steel Sheet.
TEMPERATURE RANGE (CONTROL & SENSTIVITY)
Temperature Range of the serological Bath is 50C above ambient to 950C& is maintained by Quality Hydraulic Thermostat with a sensitivity of + 10C/+ 20C or as shown in the thermometer. Optionally models Incorporated with Digital Temperature Controller Cum Indicator/Microprocessor PID controllers have an accuracy of + 0.2/0.50C
FRONT CONTROL PANEL
Front control panel consists of Indicator Lamps for Heating and Mains, On/Off Switch, Thermostatic controller/ Digital Controller or PID Controller (Optional).
POWER REQUIREMENTS
Suitable to operate on 220 Volts, 1 phase, 50 Hz, AC supply.
TECHNICAL FEATURES & SECIFICATIONS
TEMPERATURE RANGE |
50C above ambient to 950C |
|||
TEMPERATURE SENSITIVITY |
+ 1/20C (Optionally models Incorporated with Digital Temperature Controller Cum Indicator/Microprocessor PID controllers have an accuracy of + 10C /0.50C) |
|||
TEMPERATURE SENSOR |
Capillary Thermostat/ Pt-100 Sensor(Optional) |
|||
TEMPERATURE CONTROLLER |
Thermostatically Controlled (Capillary Type) (Optional) Solid State Digital Temperature Controller Cum Indicator/Micro-processor based PID Controller |
|||
INNER CHAMBER |
Corrosion resistant satin finish Stainless Steel Interior |
|||
INNER CHAMBER DIMENSIONS |
(L x W x D) |
RACKS |
RATING (KW) |
Volume (Litres) |
· 300 x 250 x 175 mm |
2 Racks |
1.0 |
13.0 |
|
· 325 x 300 x 175 mm |
4 Racks |
1.0 |
17.0 |
|
· 450 x 300 x 175 mm |
6 Racks |
1.5 |
23.0 |
|
· 600 x 300 x 175 mm |
8 Racks |
1.5 |
31.0 |
|
UPGRADES (OPTIONAL ACCESSORIES) |
|
|||
ADVANCED OPTIONALS |
|
Note: