PRODUCT APPRAISAL/APPLICATION
Rectangular water/Liquid baths are widely used for bacteriological and varied laboratory applications requiring general tests and procedures in variety of research and testing laboratories. Apart from that, these water baths have a variety of usages such as evaporating liquids like alcohol or for melting solids such as agar and various other general and specialized applications in laboratories.
CONSTRUCTION
Water/Liquid bath is a double walled heating unit. Inner chamber is made of high grade Stainless Steel Sheet and outer chamber/wall is fabricated out of thick Mild Steel sheet duly pre treated with primers for rust proofing & attractively painted with long lasting powder coating paint. The gap in between Outer & Inner chamber is filled with special grade Glass Wool Insulation to prevent any thermal losses. The unit is provided with top opening cover along with concentric Rings. These concentric Rings can be removed to accommodate containers/jars of various sizes. Complete with cord & plug.
DRAIN
The Water Bath/Liquid Bath is provided with a drain plug to facilitate easy emptying or cleaning of the Inner Chamber whenever necessary.
TEMPERATURE (HEATING)
Heating Elements
Water Bath is incorporated with an efficient heating system. Quality Immersion Heating Elements of suitable wattage are fitted at the bottom of the chamber which enables uniform heating throughout.
TEMPERATURE CONTROL & SENSTIVITY
Temperature Range of our Water/Liquid Bath is 50C above ambient to 950C& is maintained by Quality Hydraulic Thermostat/(Optional) Digital Temperature Controller Cum Indicator/Microprocessor based PID Temperature Controller Cum Indicator
FRONT CONTROL PANEL
Front control panel consists of Indicator Lamps for Heating and Mains, On/Off Switch, Thermostatic controller/ Digital Controller or PID Controller (Optional).
POWER REQUIREMENTS
Suitable to operate on 220 Volts, 1 phase, 50 Hz, AC supply.
TECHNICAL FEATURES & SECIFICATIONS
TEMPERATURE RANGE |
50C above ambient to 950C |
|||
TEMPERATURE SENSITIVITY |
+ 10C (Optionally models Incorporated with Digital Temperature Controller Cum Indicator/Microprocessor PID controllers have an accuracy of + 0.2/0.50C) |
|||
TEMPERATURESENSOR |
Capillary Thermostat/ Pt-100 Sensor(Optional) |
|||
TEMPERATURE CONTROLLER |
Thermostatically Controlled (Capillary Type) (Optional) Solid State Digital Temperature Controller Cum Indicator/Micro-processor based PID Controller |
|||
INNER CHAMBER |
Corrosion resistant satin finish Stainless Steel Interior |
|||
INNER CHAMBER DIMENSIONS |
(L x W x D) |
RATING (KW) |
No. OF HOLES |
Volume (Litres) |
·300 x 250 x 100 mm |
1.0 |
6 Holes of 75 mm Dia |
8.0 |
|
·300 x 300 x 100 mm |
1.0 |
9 Holes of 75 mm Dia |
10.0 |
|
·405 x 355 x 100 mm |
1.5 |
12 Holes of 75 mm Dia |
15.0 |
|
UPGRADES (OPTIONAL ACCESSORIES) |
|
|||
ADVANCED OPTIONALS |
|
Note: