PRODUCT APPRAISAL/APPLIACTION
Vacuum oven is widely used for drying performed in various laboratories which require heating as well as vacuum applications as well as for general tests and procedures in variety of research & testing laboratories. Apart from that, these units have a variety of usages in Agricultural Research Institutes, Laboratories and many other general and specialized applications & other experiments requiring drying & simultaneous vacuum of subject matter.
BASIC CONSTRUCTION
Vacuum Oven is a double walled heating unit. Outer Chamber/body of the oven is fabricated out of thick Mild Steel Sheet/PCRC sheet duly pre-treated with primers for rust proofing & and durably powder coated. The inner rectangular chamber is made of heavy gauge high Grade Stainless Steel sheet .The gap in between the walls is filled with special grade mineral glass wool, which ensures maximum thermal efficiency in vacuum ovens. Supplied complete with Stainless Steel removable shelf/Tray for loading the samples. Heavy duty casted Door duly aligned to ensure excellent vacuum performance & fitted with toughened glass for observation without disturbing inner chambers thermal condition. Panel consists of pilot lamps, on-off switch & controller. Suitable to work on 220V/230 Volts, single phase, 50 Hz, AC supply.
DOOR
Heavy duty Door has a tempered glass window for observation of the samples & has a secure door latch & continues silicon gasket so as to provide a tight seal & to ensure excellent vacuum performance. The toughened glass observation permits inspection of the samples without disturbing inner chamber thermal condition.
TEMPERATURE REQUIREMENT (HEATING ELEMENTS)
An efficient Heating arrangement is incorporated in the unit. Heating elements are made of high quality nickel/chrome plated ni-chrome wire duly insulated from the body & are placed around the chamber in such a manner so as to enable uniform temperature all over the inner working area.
TEMPERATURE RANGE, CONTROL & SENSITIVITY
Temperature range of Vacuum oven is 50C above ambient to 1500 C max
TEMPERATURE CONTROL & SENSITIVITY
The temperature inside the vacuum oven is controlled through Microprocessor based temperature controller cum indicator. Temperature inside the oven is controlled with a sensitivity of + 1/2 deg0C (approx) or better.
VACUUM REQUIREMENTS
Capable to withstand a vacuum of 700mm/Hg displayed on Analogue gauge or Digital vacuum Indicator (optional). Vacuum control & relief valves are located in the front of the unit for convenient monitoring.
FRONT CONTROL PANEL
Front panel of our unit comprises of On/Off Toggle/Rotary switch, heating Indicator and mains indicator lamps & Temperature controller.
POWER REQUIREMENT
Suitable to operate on 220 V, single phase, 50 Hz, AC supply.
TECHNICAL FEATURES & SECIFICATIONS
TEMPERATURE RANGE | 50C above ambient to 1500C Max |
TEMPERATURE SENSITIVITY | + 10C |
TEMPERATURESENSOR | Pt-100 sensor |
TEMPERATURE CONTROLLER | Micro-processor based PID Temperature Controller (Feather Touch Controls) |
VACCUM DISPLAY | Analogue gauge/ (Optional) Digital Vacuum Controller Cum Indicator |
INNER CHAMBER | Corrosion resistant satin finish Stainless Steel |
INNER CHAMBER DIMENSIONS (H x W x D) |
|
(OPTIONAL ACCESSORIES) |
|
Note: Following company’s constant endeavor to improve design & quality, the instrument may differ in detail, description or as shown in the manual.