H.P. RECTANGULAR HORIZONTAL STERLIZER -(STI-119)
PRODUCT APPRAISAL/APPLICATION
We are one of the leading Original Manufactures of Rectangular Horizontal Autoclaves/Sterilizers in Delhi (India), having core team with an industry experience of over 25 years. Our Rectangular Autoclaves (Triple walled) have wide application & are most suitable for Dry sterilization requirement in labs. Triple walled Horizontal Rectangular Autoclaves incorporated with steam jacket are widely used for day to day sterilization procedures and in various laboratory application where dryness of the sterilized medium is of utmost importance. Highly useful for meeting sterilizing needs of Scientific Research Institutions, Hospitals, Pharmaceutical Laboratories, Tissue culture Labs, Mushroom Centers, Bio-fertilizer Laboratories and Institutes requiring sterilization of culture media, glassware, Dressing material, utensils, surgical instruments, Lab ware etc. in steam under pressure or places with modest sterilizing requirements & thereby controlling the spread of infections caused by various pathogenic micro-organisms.
CONSTRUCTION
-
Triple Walled Unit
-
Inner Chamber of Thick Stainless Steel sheet of 304Grade
-
Outer Chamber of Stainless Steel 304 Grade
-
Lid is also of thick Stainless Steel Plate
MODE OF HEATING
-
Electrically heated by special flange type/Immersion type Heating Elements bearing ISI Mark/Equivalent Quality
-
Incorporated with Quality Heavy Duty Contactor of L&T/Equivalent Quality make
-
Suitable to operate on 440 Volts, Three phase, AC supply
WORKING PRESSURE/WORKING TEMPERATURE
-
Pressure Range: Pressure inside the chamber is variable from 5 psi to 20 psi
-
Incorporated with semi Automatic Pressure control switch
-
Working Pressure: 15 psi+2 psi, Working Temperature:1210C approximately
-
The normal recommended pressure for sterilization process is 1.2 Kg/cm2 (15psi-17psi)
SALIENT FEATURES:
-
Three Way Valve/Multiple operating Valve: Facilitates functions of sterilization cycle at one point i.e from Boiler to Steam Jacket, Jacket to chamber & Chamber to release point or exhaust
-
Stainless Steel Heavy Gauge Steam Generator (Boiler): Incorporated underneath the chamber & is fitted with:
1. ISI Marked/Equivalent Quality Immersion type Heating Elements
2. Automatic Pressure control Switch
3. Auto Low Water Level Cut off Device
4. Water Inlet & Outlet Valves
5. Water Level indicating glass gauge
6. Pressure gauge
-
Door: Stainless Steel Lid with Double Safety Radial Locking system of MS duly chrome plated
-
Gasket: Incorporated with Moulded joint less Neoprene Rubber Gasket/Silicon Rubber Gasket(optional)
-
Vacuum Breaker: A safety device to prevent vacuum formation in the chamber & to remove residual air
-
Moisture/Steam Trap/Chamber Condensate: Incorporated with steam trap and check valve for perfect condensation from chamber to achieve optimum temperature
-
Spring Loaded Safety Valve
-
Pressure & Compound Gauge
-
Digital Temperature Indicator
-
Electrical Control Box Equipped with Industrial Grade Quality Contractor, toggle switch/ MCB & neon Indicating lamps.
TECHNICAL SPECIFICATIONS
MODEL |
STI-119 |
STI-119 |
STI-119 |
STI-119 |
STI-119 |
Inner Dim
WxHxD
|
450 x 450 x 900 mm |
450 x 600 x 900 mm |
600 x 600 x 900 mm |
600 x 600 x 1200 mm |
600 x 600 x 1500 mm |
Capacity (In Litres) |
185 Litres
|
240 Litres
|
324 Litres
|
436 Litres
|
540 Litres
|
Sterilizing Pressure |
1.2 Kgf/cm2 (15 psi-17 psi) |
Power Supply |
440 Volts, Three Phase, AC supply |
OPTIONAL ACCESSORIES
-
Digital Timer with Alarm System (optional) . This is a semi-automatic device which is initiated once the pressure level inside the chamber reaches the desired value, it regulates the sterilization time of the media to be sterilized and when the desired time is passed, it activates the buzzer, which indicates that the sterilization cycle is complete and media can be extracted
-
Temperature Chart Recorder. This a semi automatic self contained easy to use recording device, which permanently records the temperature is any given sterilization cycle on a graph sheet.
-
Microprocessor based Digital Autoclave controller with Feather touch controls
-
PLC Control System
Note:
-
Above mentioned sizes are of standard Autoclave series. However, we are capable to manufacture/fabricate any special size as per customer’s exact requirement.
-
Following company’s constant endeavor to improve design & quality, the instrument may differ in detail, description or as exhibited in this manual.