PRODUCT APPRAISAL/APPLICATION
We are one of the Original Manufactures of Horizontal Autoclaves/Sterilizers in Delhi (India), having core team with an industry experience of our 25 years. Our Horizontal Autoclaves have a wide application & are most suitable for Dry sterilization requirement in labs. Triple walled Horizontal autoclaves incorporated with steam jacket are widely used for day to day sterilization procedures and in various laboratory application where dryness of the sterilized medium is of utmost importance or places with modest sterilizing requirements & thereby controlling the spread of infections caused by various pathogenic micro-organisms. Highly useful for meeting sterilizing needs of Scientific Research Institutions, Hospitals, Pharmaceutical Laboratories, Tissue culture Labs, Mushroom Centers, Bio-fertilizer Laboratories and Institutes requiring sterilization of culture media, glassware, Dressing material, utensils, surgical instruments, Lab ware etc. in steam under pressure or places with modest sterilizing requirements & thereby controlling the spread of infections caused by various pathogenic micro-organisms.
CONSTRUCTION
-
Triple Walled Unit , Inner Chamber of Thick Stainless Steel sheet of 304Grade
-
Steam/Middle jacket of Stainless Steel grade 304, Outer Chamber of Stainless Steel 304 Grade
-
Lid is also of thick Stainless Steel Plate
MODE OF HEATING
-
Incorporated with Quality Heavy Duty Contactor of L&T/Equivalent Quality make
-
Electrically heated by special flange type/Immersion type Heating Elements bearing ISI /Equivalent Quality Mark
-
Suitable to operate on 440 Volts, Three Phase, AC supply
WORKING PRESSURE/WORKING TEMPERATURE
-
Pressure Range: Pressure inside the chamber is variable from 5 psi to 20 psi
-
The normal recommended pressure for sterilization process is 1.2 Kg/cm2 (15psi)
-
Woking Pressure: 15 psi+ 1/2 psi, Working Temperature: 1210C approximately
SALIENT FEATURES
-
Three Way Valve/Multiple operating Valve: Facilitates functions of sterilization cycle at one point i.e from Boiler to Steam Jacket, Jacket to chamber & Chamber to release position or exhaust
-
Stainless Steel Heavy Gauge Steam Generator (Boiler): Incorporated underneath the chamber & is fitted with:
1. ISI Marked/Equivalent Quality Immersion type Heating Elements
2. Automatic Pressure control Switch
3. Auto Low Water Level Cut off Device
4. Water Inlet & Outlet Valves
5. Water Level indicating glass gauge, Pressure gauge
-
Door (Lid): Thick Stainless Steel Lid with Double Safety Radial Locking system of MS duly chrome plated
-
Gasket: Incorporated with Moulded joint less Neoprene Rubber Gasket/Silicon Rubber Gasket(optional)
-
Vacuum Breaker: A Safety device to prevent vacuum formation in the chamber & to remove residual air
-
Moisture/Steam Trap/Chamber Condensate: Incorporated with steam trap and check valve for perfect condensation from chamber to achieve optimum temperature
-
Spring Loaded Safety Valve
-
Pressure & Compound Gauge
-
Electrical Control Box Equipped with Industrial Grade Quality Contractor, toggle switch/ MCB & neon Indicating lamps.
ADVANCED FEATURES:
-
Microprocessor Based Controller (Feather touch controls)
-
Digital Display of Temperature & Timer
-
Incorporated with Micro Processor based Digital Temperature Controller Cum Indicator with built in Timer
-
When the SET Temperature is achieved, the Timer starts working & on completion of Set Time, stops the cycle automatically & an Audio Alarm/Buzzer (optional) goes ‘on’ so as to alert the user.
-
The steam is to be released manually by opening the steam release valve
TECHNICAL SPECIFICATIONS
MODEL |
STI-118 B 40 L |
STI-118 B 88 L |
STI-118 B 150 L |
STI-118 B 165L |
STI-118 B 221 L |
Inner Dimensions: (Dia x Height) |
300 x 500 mm |
400 x 600 mm |
400 x 1100 mm |
500 x 900 mm |
500 x 1200 mm |
Capacity (In Litres) |
40 Litres |
88 Litres |
150 Litres |
165 Litres |
221 Litres |
Rating/Load (KW) (Approx) |
5.0 KW |
6.0 KW |
9.0 KW |
9.0 KW |
9.0 KW |
Sterilizing Pressure |
1.2 Kg/cm2 (15 psi at 121 Deg C) |
Power Supply |
440 Volts, Three phase, AC supply |
Optional Accessories:
-
Thermal Printer Port
-
Self locking mechanical Door closing Device
-
Gauge Calibration Certificate
-
Digital Controller Calibration Certificate
-
GMP (Complete Stainless Steel)
-
PLC (Programmable Logic Controller) Control system
Note:
-
Above mentioned sizes are of standard Autoclave series. However, we are capable to manufacture/fabricate any special size as per customer’s exact requirement.
-
Following company’s constant endeavor to improve design & quality, the instrument may differ in detail, description or as exhibited in this manual.