PRODUCT APPRAISAL/APPLICATION
Rectangular water/Liquid baths are widely used for bacteriological and varied laboratory applications requiring general tests and procedures in variety of research and testing laboratories. Apart from that, these water baths have a variety of usages such as evaporating liquids like alcohol or for melting solids such as agar and various other general and specialized applications in laboratories.
CONSTRUCTION
Water/Liquid bath is a single walled heating units fabricated out of Stainless Steel Sheet. The unit is provided with a top opening cover along with concentric Rings. These concentric Rings can be removed to accommodate containers/jars of various sizes. Complete with cord & plug.
DRAIN
The Water Bath/Liquid Bath is provided with a drain plug to facilitate easy emptying or cleaning of the Inner Chamber whenever necessary.
TEMPERATURE (HEATING)
Water Bath is incorporated with an efficient heating system. Quality Immersion Heating Elements of suitable wattage are fitted at the bottom of the chamber, so as to enable uniform heating throughout.
TEMPERATURE CONTROL & SENSTIVITY
Temperature Range of our Water/Liquid Bath is 50C above ambient to 950C& is maintained by Quality Hydraulic Thermostat
FRONT CONTROL PANEL&POWER REQUIREMENTS
Front control panel consists of Indicator Lamps for Heating and Mains, On/Off Switch, Thermostatic controller/ Digital Controller (Optional).
POWER REQUIREMENTS
Suitable to operate on 220 Volts, 1 phase, 50 Hz, AC supply.
TECHNICAL FEATURES & SECIFICATIONS
TEMPERATURE RANGE |
50C above ambient to 950 C |
|||
TEMPERATURE SENSOR |
Capillary Thermostat/ Pt-100 Sensor(Optional) |
|||
TEMPERATURE CONTROLLER |
Thermostatically Controlled (Capillary Type) or (Optional) Solid State Digital Temperature Controller Cum Indicator |
|||
CHAMBER |
Corrosion resistant satin finish Stainless Steel |
|||
INNER CHAMBER DIMENSIONS |
(L x W x D) |
RATING (KW) |
No. OF HOLES |
Volume (Litres) |
· 300 x 250 x 100 mm |
1.0 |
6 Holes of 75 mm Dia |
8.0 |
|
· 300 x 300 x 100 mm |
1.0 |
9 Holes of 75 mm Dia |
10.0 |
|
· 405 x 355 x 100 mm |
1.5 |
12 Holes of 75 mm Dia |
15.0 |
|
(OPTIONAL ACCESSORIES) |
· Solid State Digital Temperature Controller Cum Indicator in lieu of Thermostat |
Note: Following company’s constant endeavor to improve design & quality, the instrument may differ in detail, description or as exhibited in this manual.